The Perfect Server – Ubuntu 15.04 (nginx, BIND, Dovecot and ISPConfig 3)
This tutorial shows the steps to install an Ubuntu 15.04 (Vivid Vervet) server with Nginx, PHP, MariaDB, Postfix, pure-ftpd, BIND, Dovecot and ISPConfig 3. ISPConfig 3 is a web hosting control panel that allows you to configure the installed services through a web browser. This setup provides a full hosting server with web, email (inc. spam and antivirus filter), Database, FTP and DNS services.
1. Preliminary Note
In this tutorial, I will use the hostname server1.example.com with the IP address 192.168.1.100 and the gateway 192.168.1.1 for the network configuration. These settings might differ for you, so you have to replace them where appropriate. Before proceeding further you need to have a basic minimal installation of Ubuntu 15.04 as explained in tutorial.
The steps in this tutorial have to be executed as root user, so I will not prepend “sudo” in front of the commands. Either Login as root user to your server before you proceed or run:
to become root when you are logged in as a different user on the shell.
The commands to edit files will use the editor “nano”, you can replace it with an editor of your choice. Nano is an easy to use file editor for the shell. If you like to use nano and haven’t installed it yet, run:
apt-get install nano
2. Update Your Linux Installation
Edit /etc/apt/sources.list. Comment out or remove the installation CD from the file and make sure that the universe and multiverse repositories are enabled. It should look like this:
# deb cdrom:[Ubuntu-Server 15.04 _Vivid Vervet_ - Release amd64 (20150422)]/ vivid main restricted
#deb cdrom:[Ubuntu-Server 15.04 _Vivid Vervet_ - Release amd64 (20150422)]/ vivid main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://de.archive.ubuntu.com/ubuntu/ vivid main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid main restricted
## Major bug fix updates produced after the final release of the
deb http://de.archive.ubuntu.com/ubuntu/ vivid-updates main restricted
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ vivid universe
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid universe
deb http://de.archive.ubuntu.com/ubuntu/ vivid-updates universe
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://de.archive.ubuntu.com/ubuntu/ vivid multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid multiverse
deb http://de.archive.ubuntu.com/ubuntu/ vivid-updates multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://de.archive.ubuntu.com/ubuntu/ vivid-backports main restricted universe multiverse
deb-src http://de.archive.ubuntu.com/ubuntu/ vivid-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu vivid-security main restricted
deb-src http://security.ubuntu.com/ubuntu vivid-security main restricted
deb http://security.ubuntu.com/ubuntu vivid-security universe
deb-src http://security.ubuntu.com/ubuntu vivid-security universe
deb http://security.ubuntu.com/ubuntu vivid-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu vivid partner
# deb-src http://archive.canonical.com/ubuntu vivid partner
to update the apt package database and
to install the latest updates (if there are any). If you see that a new kernel gets installed as part of the updates, you should reboot the system afterwards:
3. Change the Default Shell
/bin/sh is a symlink to /bin/dash, however we need /bin/bash, not /bin/dash. Therefore we do this:
Use dash as the default system shell (/bin/sh)? <– No
If you don’t do this, the ISPConfig installation will fail.
4. Disable AppArmor
AppArmor is a security extension (similar to SELinux) that should provide extended security. It is not installed by default from onwards 13.10. We will crosscheck if it is installed. In my opinion you don’t need it to configure a secure system, and it usually causes more problems than advantages (think of it after you have done a week of trouble-shooting because some service wasn’t working as expected, and then you find out that everything was ok, only AppArmor was causing the problem). Therefore I disable it (this is a must if you want to install ISPConfig later on).
We can disable it like this:
service apparmor stop
update-rc.d -f apparmor remove
apt-get remove apparmor apparmor-utils
5. Synchronize the System Clock
It is a good idea to synchronize the system clock with an NTP (network time protocol) server over the Internet. Simply run
apt-get install ntp ntpdate
and your system time will always be in sync.
6. Install Postfix, Dovecot, MariaDB, phpMyAdmin, rkhunter, binutils
We can install Postfix, Dovecot, MariaDB (as MySQL replacement), rkhunter, and binutils with a single command:
apt-get install postfix postfix-mysql postfix-doc mariadb-client mariadb-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve sudo
MariaDB is fork of the MySQL database server, developed by the original MySQL developer Monty Widenius. According to tests found on the internet, MariaDB is faster then MySQL and it’s development is going on with more pace, therefore most Linux Distributions replaced MySQL with MariaDB as default “MySQL alike” database server. In case that you prefer MySQL over MariaDB, replace “mariadb-client mariadb-server” in the above command with “mysql-client mysql-server”.
You will be asked the following questions:
Create a self-signed SSL certificate? <-- yes
Host name: <-- server1.example.com
General type of mail configuration: <-- Internet Site
System mail name: <-- server1.example.com
Next open the TLS/SSL and submission ports in Postfix:
Uncomment the submission and smtps sections as follows – add the line -o smtpd_client_restrictions=permit_sasl_authenticated,reject to both sections and leave everything thereafter commented:
[...] submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING [...]
Restart Postfix afterward:
service postfix restart
We want MariaDB/MySQL to listen on all interfaces, not just localhost. Therefore we edit /etc/mysql/mariadb.conf.d/mysqld.cnf (for MariaDB or /etc/mysql/my.cnf (for MySQL) and comment out the line bind-address = 127.0.0.1:
Now we set a root password in MariaDB. Run:
You will be asked these questions:
Enter current password for root (enter for none): <-- press enter
Set root password? [Y/n] <-- y
New password: <-- Enter the new MariaDB root password here
Re-enter new password: <-- Repeat the password
Remove anonymous users? [Y/n] <-- y
Disallow root login remotely? [Y/n] <-- y
Reload privilege tables now? [Y/n] <-- y
Then run this command to disable the auth plugin:
echo "update user set plugin='' where User='root';flush privileges;" | mysql --defaults-file=/etc/mysql/debian.cnf mysql
To allow password based authentication from PHPMyAdmin.
[...] # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 [...]
Then we restart MariaDB / MySQL:
service mysql restart
The systemd service name for MariaDB and MySQL is “mysql”, so the restart command is the same for both.
Now check that networking is enabled. Run:
netstat -tap | grep mysql
The output should look like this:
[email protected]:~# netstat -tap | grep mysql
tcp 0 0 *:mysql *:* LISTEN 23785/mysqld
7. Install Amavisd-new, SpamAssassin, And Clamav
To install amavisd-new, SpamAssassin, and ClamAV, we run
apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
The ISPConfig 3 setup uses amavisd-new which loads the SpamAssassin filter library internally, so we can stop SpamAssassin to free up RAM:
service spamassassin stop
update-rc.d -f spamassassin remove
To update the ClamAV antivirus signatures and starte the Clamd service. The update process can take some time, don’t interrupt it.
service clamav-daemon start